Showing posts with label V-Strom. Show all posts
Showing posts with label V-Strom. Show all posts

Tuesday, February 09, 2016

Bye-bye


Yes, the mighty Vee has gone to a new home.  She has gone to an Aussie biker who will keep her here in the Manawatu and use it on his trips over here.  He seems pretty happy with the deal and I hope gets a lot of fun out of her.

I've had a lot of fun on her myself and will miss her like all my previous bikes but now the time has come to find something new....

Sunday, June 28, 2015

Another weekend...

...another Oil change.

This time it was the Vee's turn to get some love.  A nice simple job for a Sunday afternoon.  It's actually easier than the Connie even though you have to take off the little belly pan to access the filter.  The toughest part is waiting for the oil to drain...


Wednesday, May 06, 2015

Wrestling in the shed

Tonight I changed my 2nd motorcycle tyre - this time the front tyre on the V-Strom.  Overall it was easier than when I did the rear but it's not easy and not my favourite thing to do - I might let the shop do the next one...

Ready to get started
Getting the wheel off is the easy bit although as the stand doesn't quite get the bike up higher enough the front mudguard needs to be removed (or nearly removed with most of the bolts removed) and the brake calipers unbolted and slipped off the discs.

Next up is breaking the bead and removing the tyre.  Breaking the bead on the front tyre was approximately 1,000 (maybe 1,001) times easier than when I did the rear - I just pushed down on the sidewall (after soaping it up) with a piece of 4x2 and Bob was my uncle.

Bead broken and ready to attack it with the spoons
Then it was time to get the tyre off.  Using my new spoons and rim protectors this was pretty easy too.

Bingo!
Now for the hard part...Getting the first side of the tyre over the rim wasn't too bad but when it came to getting the other on I had a few issues.  What you really need is a couple of extra arms and possibly an extra leg as well - juggling three levers and keeping weight on the tyre is fairly entertaining.  I also need to get myself a rubber hammer.  No need to go to the gym tonight either...

But in the end it was on and my compressor soon had the bead set.  I then lowered the pressure back to somewhere around where I run it and re-installed the wheel onto the bike.

Brand spankers Conti Trail Attack
As you can see I've gone for a less aggressive front than the E-07 that I took off.  This is mainly due to price and that I'm now going to put the Vee on the market and go in search of a replacement.  It looks like it'll be a good tyre on the road but not as good off.  Here's what a 9,000km old E-07 (great tyres) looks like:


Even though I'm selling the Vee, I still like it a lot and am looking forward to getting a WOF for it on Saturday and going for a bit of a pootle...

Friday, October 24, 2014

Amateur hour(s) in the shed

Yesterday I showed the Connie some love by giving her a bath and then changing the oil & filter and the oil in the final drive.  That stuff is easy and as usual I had no issues.  Today I took on something new...

The rear E-07 on the V-Strom has been stuffed for a while and as I'd picked up a replacement the other week I decided to see if I could fit the new one myself instead of paying someone to do it.  I knew it wasn't going to be that easy doing a tubeless tyre with my zero skill and limited tools (I had to borrow a couple of extra levers and a rubber hammer from the old man) but hey, I had the whole afternoon...

After whipping the wheel off and pulling the valve (well, that bit was easy) it was time for the hard bit - breaking the bead.  I had a short and feeble mess around with levers and soapy water and got nowhere so it was time to consult the interweb.

This video showed how to do it with a bit of extra leverage, while this one reckoned you could just use ya spoons and a bit of patience to get the job done.  I started with just trying to use the spoons but found I was getting nowhere so went in search of some "stuff" I could use to copy the procedure in the first video.

Unfortunately I don't have four arms (although I could have used them) so there's no pictures or video of the operation but yes it involved the Subaru and a couple of bits of wood...

I sweated and struggled and got rained on but in the end I finally broke the bead on one side and then the other.  Then it was time for the spoons and I actually had the tyre off pretty quickly.

Then it was time to fit the new one.


Getting the first side of the tyre on over the rim wasn't too hard with the use of soapy water and a big heavy dude standing on the tyre.  Getting half of the other side on was ok too but getting the last of it on was a bit of a wrestle with the spoons and rubber hammer having to come into play.  But we got there in the end!

 

Five minutes later the wheel was back on and the Vee ready to roll again.


Oh, and if I'd paid myself at the same rate I paid the shop last time to so this then I would have made nearly $10 an hour...

Tyre fitted it was time for another job on the Connie - change the air filter.  This is the second time I've done it myself so it wasn't too much of a big deal and I just tore into it.  She has to shed some clothes and some other spag needs to get moved aside but it's a pretty straight forward job - it just takes a bit of time.


Anyway, regardless of the time it took and the frustration with the tyre it was a neat way to spend some time in the shed and give the bikes a little bit of TLC.

Must be time to hit the road again...

Monday, May 26, 2014

A different way to get dirty

On Saturday I rode over to the old's place to finish up a job on the V-Strom that we started a while ago.

Prior to tackling the 42nd traverse Dad helped me to change the front sprocket (embarrassingly worn out).  We fitted a smaller one to lower the gearing for the expected "slower" riding on the ride.  As you can see it was a pretty mucky experience.





While we were under there we discovered that the dust seal on the clutch slave cylinder was broken so I ordered one of these along with a new chain and rear sprocket the following week and Saturday was the day to fit these and finish the job off.

After lunch I rode over to Feilding only to find nobody home so after sending a fruitless text I got on the bike and went for a wee pootle around Feilding and then took a short ride around the outskirts of the town to burn up some time.


On the way back towards Feilding I tried to find a spot on the road where I could see the old's house and maybe get a picture of it.  I failed miserably but checked out a new subdivision and got the below pic showing Feilding in the upper left hand side of the picture and Palmy off in the distance to the right.  Also, some weather on it's way...


While parked I got a text to say that Ma and Pa were home so I made my way back to their place and rode straight into the shed so we could get to work.

We got the chain on (a bit trickier than it should have been - no clip, we had to press it on) and fitted the new dust seal but the bike shop had given me the wrong rear sprocket (wrong pitch and number of teeth!) so that didn't end up getting done.  Luckily the rear sprocket is still in pretty good shape so it'll have to hang in there for a bit longer.

While we were doing these jobs that weather caught up with us and we had a good thunder & lightning show along with some very generous lashings of rain - it wasn't looking very nice for my wee trip home.  Luckily there was a bit of a lull in the storm just as we finished up so I skedaddled while the skedaddling was good and raced home on wet roads.  Later on the storm hit pretty full force with some serious cloud moisture coming down and the wind trying to blow away anything not nailed down.  Never mind the fire was soon on and it was cosier inside.

Hoping for some decent weather this weekend...

Saturday, May 10, 2014

Harnessing some ergs

Before we get too far into this, know one thing: I'm a pretty hopeless amateur when it comes to electrickery and wiring stuff up...

For I while I've tossed around the idea of being able to charge certain gadgets while on the bike and my thoughts were to electrify my tank bag so all the gadgets could sit in there while they're charging.


Of course, I could have splurged on the special setup that SW-motech sell for this bag but I think the components must be made of gold.  Instead I decided to install a dual 12v socket setup in the bag and use cheap USB adapters to charge the gadgets.


At the moment the wires exit the bag through the base and end at a 12 plug that goes into my existing accessory socket in the fairing of the bike.  Eventually I'll replace this with a separate wire from my fuse block to some waterproof connectors.



I had my wee dramas wiring things up and with no ergs coming through into the bag I was doubting my electrical skills more and more until I discovered a blow fuse in the 12v plug (I had cut this plug off something else and it hadn't been used forever).  With that fixed you'll never guess what happened...

Magic
So now I can charge 4 USB gadgets at once (handy because my GoPro needs 3 and the phone 1) or unplug as adapter and use the 12V socket (one of my cameras has a 12v charger).  I'm sure I'll use this setup at least once a year...a very necessary farkle eh?

Now I just need a similar setup for the Connie (more likely to use it on the Connie too) but I'm not sure if I'm going to be able to use the tank bag as the Connie's little glove box thingee in the middle of the tank is causing me some clearance issues - I'll have to put my thinking cap on.

Wednesday, April 30, 2014

Tiger vs V-Strom

Okay, so after I tamed the Tiger I've been nagged into putting down some thoughts on the Tiger versus the V-Strom.  But beforehand I need to let you in on a little secret - pretty much no matter what the bike is, when I get a ride on it I like it - I just love riding all sorts of bikes...


So, all bike reviews usually have flash tables and charts to compare specs because as everyone knows, numbers are what really are the most important thing - not what the beasts are like to ride.  Here's my whizz-bang table:


The highlighted stats perhaps indicate where the particular bike might have an advantage over the other but we still haven't fired them up yet...

One thing that both bikes had in common was the tyres.  Both bikes are wearing Mitas E-07's and both Neil and I really like these - in the conditions we were riding in they were...wait for the cliche...confidence inspiring.  The only difference is that the Tiger wears a 21 inch on the front to the V-Strom's 19.  Also, Neil's tyres were at the end of their life (a very respectable 11,000km) where as my rear only has just under 3,000km and the front about half that.

Walking around the Tiger you can see what Neil spends his pocket money on - he has added quite a few nice little farkles to make the bike his.  The most noticeable being the crash protection and the Arrows can but there are little things like a "foot" on the side-stand, the fog lights, bigger/wider pegs and the list goes on.  There are also a couple of invisible farkles in the form of upgraded springs both front and rear.

The bash plate looks the biz and the V-Strom could use one as the plastic cowl on the bottom is really only for looks and there's a nice vulnerable oil-cooler hanging down below the front exhaust header which I'm sure would not appreciate being clobbered by a rock.  The Tiger also probably has slightly more ground clearance (and plenty more suspension travel) although even on the 42nd Traverse I don't think I scraped the cowl on the ground.


Righto, so we've walked around the Tiger and checked out all the sparkly farkles, time to get on and see how she fits.  So the seat is slightly higher than the V-Stroms but I think that it is perhaps a little narrower up close to the tank and I didn't really notice the seat height as a problem.  Flicking the side-stand up and lifting the bike to vertical was a piece of cake - to me the Tiger felt even lighter than the stats indicate.

Neil had his tank-bag on and it sat up high and forward enough that it didn't get in my way.  This also added to the feeling of sitting "in" the bike rather than on - fairly similar to how it feels on the V-Strom.

Neil has also adjusted his handle-bars and controls a fair way forward.  He has done this so that the bike feels better when riding standing on the pegs - the larger foot-pegs also help here.  The position of the controls didn't really affect anything when riding sitting down either although I had to have a couple of goes at finding the indicator switch.  The handle-bar position also feels a lot more "aggressive" and I felt that it made me feel more like grabbing the bike by the scruff of the neck and cutting loose - bummer eh?

Finally it was time to fire up the beast and get rolling.  After finding the key (partially hidden by the tank bag) I thumbed the starter and the little triple snarled into life before settling into a smooth purr.  By comparison the V-Strom sort of explodes into life before settling into a typical V-Twin rumble.  The triple obviously spins up quicker than the twin and both engines definitely have distinctive personalities.

Leaving Hunterville and getting out onto the open road I definitely noticed the lower gearing on the Tiger.  Neil has dropped one tooth on the front sprocket and while I have also recently done the same on the V-Strom the smaller Tiger engine is spinning nearly 1,500rpm higher than the Vee at 100km/h.  With the Tiger engine being so smooth this isn't really an issue but possibly hurts the fuel economy on long sections of sealed road.  Later I was to find that the lower gearing meant that when off the seal there was always a gear for every condition.

Turning off the main road and onto Murimotu Road we started to encounter a few more corners so I had the chance to start to get to learn the Tiger's handling characteristics.  To me the bike felt very light and chuckable - just like a big dirt bike.  I had thought that the 21 inch front might slow the steering down a little (I've noticed this on other bikes) but I had no issues there.

The roads were a little damp in places so we didn't push too hard but I had absolutely no complaints about the suspension and brakes - everything just worked and I felt quite at home on the unfamiliar mount.  I was also getting used to the engine and found that 4-6,000rpm kept things humming along pretty nicely.  The clutch and gearbox action were just a couple of other things that I didn't have to think about.


Turning off onto Watershed Road we eventually left the tarmac and got onto some great gravel that was in really nice condition.  Things did not slow down a heck of a lot and the Tiger felt really good - it didn't take me long to get used to how it handled in the gravel and I really got into it.

The smooth power delivery was really nice as you came out of the corner.  You can just roll on the throttle and the power comes in nice and smoothly and it's easy to tell when you get near that point where the rear wheel wants to break traction and if you really want to, you can then back it off a bit - or not.  With the combination of the willing motor and lowered gearing the gearbox gets a fair workout which I actually quite enjoyed - I was riding the bike the whole time.

By comparison if you are a bit ham-fisted on the V-Strom it does not take much at all to get the rear end to break free - the torque from the twin can be a fair bit more violent if you are not careful.  Neil had this happen a few times (and think it probably put a grin on his dial) but soon came to grips with the beast and was napping at my heels.  The Vee also doesn't require as many gear changes - it will lug at low revs (generally I try to avoid 1st gear on gravel) and between closer corners it is fun to just hold a gear and then back off and enjoy the engine braking (and music) as you slow up for the next turn.


I ended up doing probably close to 100km on the Tiger in gravel and enjoyed every second - except perhaps some mushy stuff where the front end tried to go out from under me a couple of times, the worn front tyre was probably my enemy here.  One of the highlights was in the afternoon when we were on fast gravel and having a real ball - both bikes got their legs stretched and we even copped some air over a hump in the road at one stage!

In the end I had to give the Tiger back and clamber aboard the Vee for the ride home.  It actually took me a wee while to get used to the Vee again whereas I'd felt at home pretty quickly when I had got on the Tiger.  So I guess that sums it up a bit really - the Tiger was an easy bike to come to grips with and one heck of a lot of fun on the gravel.  It's now added to the list of bikes I've ridden and wanted to take home with me...

Friday, February 28, 2014

Vee Rubber

Today it was time to get the K60 front peeled off the V-Strom and replaced with a Mitas E-07 to match the one on the rear.  This meant I got to use my race stand...

Hover bike!

The wheel removal was a piece of cake although I did have to unbolt the mudguard so that I had enough clearance to remove the wheel.  The front axle was also fairly tight - but then that's a good thing I 'spose.


The Heiny has about 10,800kms on it so has lasted very well (much better than the rear did) and I have even kept it in case I should need it at some stage.




The new Mitas was spooned on by the local bike shop and looks suitably chunky - I sense a gravel ride coming up very shortly...



Replacing the front wheel was the just as easy as getting it off although I did remove one brake caliper to make things a little easier.

Gravel here we come!

Sunday, January 12, 2014

Filtering

Yesterday it was time to show the DL a bit of love - I know, you're not supposed to but just every now and again ok?

Love in this case was represented by a new air filter.  I guessed that she was probably still running her original one and figured with her favourite diet of dusty gravel roads being reasonably regular, it was probably time to spoil her.

First of all I had to take off some of her clothes (this how-to was helpful although I had done this before) and the air-box was soon uncovered.  The trickiest bit is the fuel fitting under the tank but it is the same type as on the Connie so I managed to work it out ok with a bit of muttering and holding my tongue just right.


Jeebus!  The dust gets in everywhere!
Popping the lid gave me the first look at the old air cleaner:

All sorts of wildlife seems to get sucked in
It doesn't look too bad eh?  Oh, well here it is against the new one:


Ok, we'll stick with the plan and put the new one in:


All that remained to do was to button everything up and put the clothes back on again.  She even fired up once the go-juice was reconnected!

But the fun didn't stop there!  Today Mark brought around his bike and we not only did the air filter but also the plugs and the oil and oil filter too.  Shed fun is nearly as good as riding fun.


DL and Connie wait patiently while another bike gets some loving

Friday, December 06, 2013

New Vee video review


Liking what they're saying about comfort and ridability.  Max torque at lower rpm is great and will make the bike a good relaxed tourer.  Really want to see what they're like on gravel...

Engine sounds very similar to old one...

Friday, November 22, 2013

Vee Rubber

After 9,500km the rear Heindenau K60 is coming off the DL and going in the bin.  Here's what it looked like when new:

Very chunky
I bought the Heinies because I'd heard that for quite aggressive tyres they were supposed to wear very well.  When I first put them on I took things a bit easy on them wanting them to last but after a while I decided to just ride them like any other tyre.  This meant hammering them whether on tarmac or gravel.

A puncture I picked up while possibly running the pressure a bit low on rocky terrain
On road they've felt pretty good, on my first ride it was wet and they slithered around a bit until they got buffed up a bit and then they were fine.  On gravel they have been great except when in very deep stuff (with the centre ridge they tend to not sink in to give decent bite) and it takes a bit of a handful to get the rear sliding.  On one trip across North Range Road it was quite wet and the tyres handles the clay/mud in the big puddles up there pretty well - the rider was a bit nervous though...
Half gone
Looking at the wear on the tyre you can kinda tell that a 1,000cc V-twin does a bit of damage - most of the wear is in the centre of the tyre and even though the tyre has been to the edge there is still plenty of meat on the sides.

9,500km
If only the centre had lasted better...

Overall I'm reasonably happy with how the Heiny has gone (and the front is still going strong) as I have been hard on it but one negative is the cost.  I could get a PR2 for the Connie for the same money or less and get more km out it - the PR2 would probably not have been so good in the gravel though eh?

So the wheel is off and hopefully the guys at the shop are getting stuck into putting the new hoop on.

Mmmm, fresh rubber
This time around I'm having another experiment - I'm trying a Mitas E-07.  Neil runs these on his Tiger and likes 'em so I thought they were worth a try.  I have a sneaking suspicion that the compound is not as hard as the Heiny but they are considerably cheaper than the Heinies.


Might get the chance to give them a test tomorrow...

Here's Neil giving his thoughts on the E-07's:



Monday, September 09, 2013

Another fabulous video from Neil

The Trumpy was going just fine at this stage.  I was playing it pretty safe on my shot rear tyre...still had a blast though!

Monday, September 02, 2013

Great wee vid!

I can't think why but this is my favourite video on the interweb at the moment:



More of Neil's videos.

Saturday, August 24, 2013

Oops!

Something strange happened...

Spoilt Vee
That's South Island dirt lying in the bottom of that puddle...it's been a while.

Now to get her dirty again...